Networkings Solutions

byadmin

There are many things that go into owning and operating a successful business. The first thing you want to do is make sure you have products and services that are of the highest quality. You’ll also want to ensure that there’s a market for the products and services that you provide. You’ll also want to hire the right staff and making quantifiable headway in marketing your business. However, when it comes to protecting your business, not only are good security systems important, but so is the wide variety of commercial insurance options.

When you look at commercial insurance, you may be very surprised by the many different options there are. Some of the more common types of insurance options include property insurance, liability insurance, and workers compensation insurance. However, there is a long list of alternative policies that are available for businesses of all different types.

It’s important to understand that not all of these alternative policies are going to be required for your business. Some policies are specific to different types of businesses and, in some cases, these specialty policies may be required by local and state governments. For example, in some states, a restaurant, bar or a pub may be required to purchase alcohol insurance. This is the type of insurance that covers your business if you’re sued because someone were to get drunk and go out and injure somebody in a car accident.

There are other types of insurance policies that offer coverage if you were to lose a valued employee. In addition, there are also umbrella policies that cover your business through property insurance, liability, and even workers compensation insurance should the limits of your initial coverage be exceeded.

When it comes to commercial insurance options, your choices are going to be many, and it’s important to know which policies are going to be right for your business. That’s why, if you want to Request a Quote on commercial insurance, you may want to speak with an expert in commercial insurance. These commercial insurance experts can help you to understand the various different specialty policies. They can also help you determine whether any of the specialty policies need to be added to your basic commercial insurance in order to protect your business properly.

Check out our videos on Youtube.

100-105 Preparation Material

by

Judith M. Ehlers

Question: 1

You have configured the host computers on a campus LAN to receive their DHCP addresses form the local router to be able to browse their corporate site. Which statement about the network environment is true?

A. It supports a DNS server for use by DHCP clients.

B. Two host computers may be assigned the same IP address.

C. The DNS server must be configured manually on each host.

D. The domain name must be configured locally on each host computer.

Answer: C

Question: 2

Which Ethernet interface command is present when you boot a new Cisco router for the first time?

A. speed 100

B. shutdown

C. ip address 192.168.1.1 255.255.255.0

D. duplex half

Answer: B

Question: 3

After you configure a default route to the Internet on a router, the route is missing from the routing table. Which option describes a possible reason for the problem?

A. The next-hop address is unreachable.

B. The default route was configured on a passive interface.

C. Dynamic routing is disabled.

D. Cisco Discovery Protocol is disabled on the interface used to reach the next hop.

Answer: B

Question: 4

Which table displays the MAC addresses that are learned on a switch?

A. FIB

B. ARP

C. TCAM

D. CAM

Answer: B

Question: 5

In which two ways does TCP differ from UDP? (Choose two.)

A. TCP segments are essentially datagrams.

B. TCP uses broadcast delivery.

C. TCP provides sequence numbering of packets.

D. TCP provides synchronized communication.

E. TCP provides best effort delivery.

Answer: CD

Explanation:

Reference: http://www.diffen.com/difference/TCP_vs_UDP

Question: 6

Refer to the exhibit.

A network has been planned as shown,Which three statements accurately describe the areas and devices in the network plan? (Choose three.)

A. Network Device A is a switch.

B. Network Device B is a switch.

C. Network Device A is a hub.

D. Network Device B is a hub.

E. Area 1 contains a Layer 2 device.

F. Area 2 contains a Layer 2 device.

Answer: ADE

Question: 7

Which set of conditions comprises a successful ping attempt between two connected routers configured with IP addresses on the same subnet?

A. The destination host receives an echo reply from the source host within one second and the source host receives an echo request from the destination host.

B. The destination host receives an echo request from the source host within one second.

C. The destination host receives an echo reply from the source host within one second and the source host receives an echo reply from the destination host within two seconds.

D. The destination host receives an echo request from the source host and the source host receives an echo request from the destination host within one second.

E. The destination host receives an echo request from the source host and the source host receives an echo reply from the destination host within two seconds.

Answer: C

Question: 8

Which NTP concept indicates the distance between a device and the reliable time source?

A. clock offset

B. stratum

C. reference

D. dispersion

Answer: B

Question: 9

Which statement is a Cisco best practice for switch port security?

A. Vacant switch ports must be shut down.

B. Empty ports must be enabled in VLAN 1.

C. VLAN 1 must be configured as the native VLAN.

D. Err-disabled ports must be configured to automatically re-enable.

Answer: A

Question: 10

Which statement describes the effect of the overload keyword in the ip nat inside source list 90 interface ethernet 0/0 overload command?

A. Addresses that match address list inside are translated to the IP address of the Ethernet 0/0 interface.

B. Hosts that match access inside are translated to an address m the Ethernet 0/0 network.

C. Hosts on the Ethernet 0/0 LAN are translated to the address pool in access list 90.

D. Addresses that match access list 90 are translated through PAT to the IP address of the Ethernet 0/0 interface

Answer: D

Explanation

The command ip nat inside source list 90 interface ethernet0/0 overload means:

+ ip nat: use NAT

+ inside: NAT from inside to outside

+ source list 90: the source addresses can be found in access list 90

+ Interface Ethernet 1: NAT out of this interface

+ overload: use NAT overload (PAT)

Question: 11

Which technique can you use to route IPv6 traffic over an IPv4 infrastructure?

A. NAT

B. 6to4 tunneling

C. L2TPv3

D. dual-stack

Answer: B

Question: 12

Which NAT command can be applied to an interface?

A. ip nat inside

B. ip nat inside test access-list-number pool pool-name

C.ip nat inside source static 10.10.10.0 10.10.10.50

D. ip nat pool test 10.10.10.0 10.10.10.50 255.255.255.0

Answer: D

Question: 13

Which subnet address is for the IP address 172.19.20.23/28?

A. 172.19.20.20

B. 172.19.20.0

C. 172.19.20.32

D. 172.19.20.15

E. 172.19.20.16

Answer: E

Explanation:

/28

4 mask 16 subnets

4 unmask 16 hosts for block size

192.19.20.0 to 192.19.20.15

192.19.20.16 to 192.19.20.31

14 more times for the full range of subnets

Question: 14

Which protocol verifies connectivity between two switches that are configured with IP addresses in the same network?

A. ICMP

B. STP

C. VTP

D. HSRP

Answer: A

Question: 15

Which command displays the number of times that an individual router translated an inside address to an outside address?

A. show ip protocol 0

B. show ip nat translation

C. show counters

D. show ip route

E. show ip nat statistics

Answer: E

Question: 16

On which OSI layer doesa VLAN operate?

A. Layer 1

B. Layer 2

C. Layer 3

D. Layer 4

Answer: B

Question: 17

Which statement describes the effect of the copy run start command on a router in enable mode?

A. The running configuration of the router is saved to NVRAM and used during the boot process.

B. The router reboots and loads the last saved running configuration.

C. A copy of the running configuration of the router is sent by FTP to a designated server.

D. A new running configuration is loaded from flash memory to the router.

Answer: A

Question: 18

Refer to the exhibit. All devices attached to the network are shown. Which number of collision domains are present in this network?

A. 9

B. 3

C. 6

D. 2

E. 15

Answer: E

Test Information:Total Questions: 263Test Number: 100-105Vendor Name: CISCOCert Name :.CCNATest Name: INTERCONNECTING CISCO NETWORKING DEVICES PART 1 (ICND1) V3Official Site: http://www.examkill.co.ukFor More Details: http://www.examkill.co.uk/100-105.htmlGet20% Immediate Discount on Full Training MaterialDiscount Coupon Code:3219R86596

Article Source:

eArticlesOnline.com}

byAlma Abell

DTH is an emerging and is well on its way towards becoming one of the market leaders in the DTH segment. The company presently transmits digital satellite signals all across the country and is looking at further expansion into untapped territories.

The company is a pioneer with regard to its use of MPEG-4 advanced technology which enables enhanced quality of signals and compression. Sun Direct is also the first DTH company to provide HD or High Definition content for mainstream markets. Easy Sun Direct online recharge systems and its gigantic arsenal of regional content makes it one of the best home entertainment options for customers in the country. Sun Direct has spread its wings all over India and customers appreciate the affordability and viability of each of its packages. Alongside, the company also provides the latest set top boxes which come with HD and USB recording technology for a superior experience. The company is leaving no stone unturned to make DTH a mass entertainment option and is steadily scaling up its distribution and customer service network. You can get more details on recharge offers at Recharge and More.

Sun Direct online recharge helps you recharge your subscription voucher without locational, time and energy constraints. It is a simple process and only requires you to enter your credit card number of 16 digits on the home portal. Thereafter, you have to enter the year and expiry date of your card followed by its CVV of 3 digits which is usually found on the back of the card. The IVRS payment system will display and finalize your transaction details once the verification process is complete. You can create your own customer ID, which makes future transactions easier and payment processes can also be executed by calling a specified recharge number. Customer friendliness is the chief USP of Tata Photon Plus and makes it a force to reckon with in the Indian telecommunications market.